Century FE1036SU HEATMASTER® ULTRA Condenser Fan Motor, 1/3 HP, 1 Ph, 60 Hz, 208-230 V, 1075 RPM, 1 Speed, 48 Frame, TEAO Oil Burner

Century FE1036SU HEATMASTER® ULTRA Condenser Fan Motor, 1/3 HP, 1 Ph, 60 Hz, 208-230 V, 1075 RPM, 1 Speed, 48 Frame, TEAO Oil BurnerHeatMaster Ultra Condenser Fan Motor 5. 6" Diameter 48 Frame Permanent Split Capacitor (PSC); Capacitor Required: 7. 5 Mfd 370 Volts (Not Supplied with Motor) Thermally Protected Totally Enclosed Air Over Class F Insulation, 80C Ambient Ball Bearing 1 2" Diameter Shaft with Double Flat 48" Leads Extended Studs Shaft End, Mounting Holes in Shell, 4. 33BC Lead End End Frame, Belly Band Mount (Belly Band Not Included) Additional Information Thermal

Standard NEMA MG-1 Frequency 60//50 Hz Voltage 230/460//380 V Number of poles 4 Degree of Protection IP55 Synchronous speed 1800 rpm Output rating 125 HP Mounting F-3 Flange Without Terminal box¹ Top Enclosure IC411 - TEFC

118" Terminal Block Without Shaft Material SAE 1040/45 Carbon Steel Painting Munsell N 1 - Matte 207N (ISO 12944 - C2) Grounding Lugs Single Fan Cover material Without Fan Cover Tropicalized Painting Without Fan material Without fan Bearing cap Yes- Bearing Cap Bolt Material Carbon Steel Balancing Method 1/2 Key Drip Cover Without Resilient Base Without Overload protector (phenolic) Without overload protector Connection Cables Quantity 9 Downloads

anticorrosive internal coating and high efficiency

Model_Number K055CLN1469012B PRODUCT NAME

375 IN Shaft Ground Indicator Shaft Grounding Shaft Rotation Reversible Speed 1160 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings

25 MOTOR TYPE FHP OPPOSITE END BEARING BALL SHAFT END BEARING BALL AMBIENT 50 ROTATION CCW DRIVE END REV SERVICE FACTOR 1

Start Configuration DOL Break-Down Torque 250 LB-FT Pull-Up Torque 116 LB-FT Locked-Rotor Torque 147 LB-FT Starting Current 201 A Full Load Torque 0 LB-FT No-Load Current 0 A Line-Line Res

9 % Electrically Isolated Bearing Not Electrically Isolated Feedback Device NO FEEDBACK High Voltage Full Load Amps 3

14 BREAKDOWN TORQUE UOM OZFT LOCKED ROTOR TORQUE 20

0 Speed (RPM) 899 889 879 868 856 841 823 0 Line Amps 2

3x(Code M) No load current 3

417 0 Line Amps 6