RobbJack - WD1-203-08 2 Flute Standard Length Solid Carbide Downcut 1/4" Router 13164-60-6

RobbJack - WD1-203-08 2 Flute Standard Length Solid Carbide Downcut 1/4" Router 13164-60-6Great for dados and shallow grooves in laminated or wood materials. The downshear puts downward force on the top edge of the material so it helps reduce chipping or poor finish on the top edge of your material. If you are experiencing flaking or problems on the top edge of your wood or laminated materials and need the cleanest edge the downshear tool will help. The downshear may pack debris in the bottom of the slot more than an upshear tool. So

220 V and 9

so a good work-holding system is important to eliminate any movement or vibration which can cause inaccuracy and poor cut quality

Size: 110XL037

There is also a graphical view of the motion profile (S curve) that is used by our machine

Suitable for use on a variety of wood materials such as soft wood

Note: Blue based color dissipates immediately upon use

has a product number that starts with "NCMB150" on the product label

particleboard and balsa core where "flow through" or "high flow" fixturing is employed using large capacity vacuum pumps

Tecknic Servo Motor (M-3244C-LS-16D)

High flute volume enables higher feed rates and chip loads

316 Stainless

): A2MC Revision 6