Bando 7M600 Banflex Goodman

Bando 7M600 Banflex GoodmanBando 7M600 The small cross section of the BanFlex belts makes them the preferred choice where short center distances and small diameter sheaves are required on compact equipment designs. The 60 sidewall angle and precision molded, seamless construction allows for precise belt to sheave meshing in high speed applications up to 10,000 RPM. Precision cast, seamless polyurethane body for maximum power transmission capability at high speeds. Polyester

Load 32° C Start Configuration DOL Break-Down Torque 110 LB-FT Pull-Up Torque 42

25 MOTOR TYPE 000 OPPOSITE END BEARING BALL SHAFT END BEARING BALL AMBIENT 50 ROTATION CW LEAD END REV SERVICE FACTOR 1

6 RPM 3450 FRAME 182TC SF 1

Standard NEMA MG-1 Frequency 60//50 Hz Voltage 230/460//380 V Number of poles 4 Degree of Protection IP55 Synchronous speed 1800 rpm Output rating 20 HP Mounting W-6 Flange C Terminal box¹ Left position Enclosure IC411 - TEFC

5-10 AIR OVER VOLTS 230/460 AMP 23/11

lb Locked rotor torque 240 % Breakdown torque 270 % Locked rotor time 45s (cold) 25s (hot) Moment of inertia (J) 172 sq

Frame 143/5TCZ Output 1

15 STARTCAPMFD N\A SHIPPING WEIGHT 89 INSULATION CLASS F KVA CODE LETTER G NEMA NOMINAL EFFICIENCY 83

AEM3689-4 SPEC

Model_Number FG14 PRODUCT NAME 50 HP - TEFC-IP54 - 1785 PHASETYPE 3_PHASE MOTOR ENCLOSURE TEFC-IP54 HORSEPOWER 50 KILOWATTS 37

Bando - 7PK1290 Trusted by the world's Top Automakers

Tooth ProfileS8M